MENU

COLIGO EdgeBox

COLIGO EdgeStack can be hosted on any Intel or ARM based hardware. Using the COLIGO EdgeBox is optional but as bundle, you get a plug-and-play solution.



The first generation COLIGO EdgeBox is based on the Toradex Verdin iMX8M Plus.

  • Modern System on Module form factor
  • Up to four Cortex-A53 1.8 GHz processors
  • Cortex-M7 processor with speeds up to 800 MHz
  • Neural Processing Unit (NPU)
  • Image Signal Processor (ISP)
  • NXP i.MX 8M Plus applications processor
  • Onboard dual-band 802.11ac 2×2 MU-MIMO Wi-Fi and Bluetooth 5







Specifications
  • DC 9 to 30V
  • 12 single-ended or 6 differential inputs
  • Absolute value of measured signals must be within -1V to 31V referenced to Gnd pin on input connector
  • 11 Voltage ranges from ±32mV to ±32V
  • Built-in shunts to convert voltage inputs into 0-25mA current inputs
  • 16 bit ADC, 8 to 860 samples per second
  • Typical measurement error on 32V range: ±3mV (0.01 % FS) at 25DegC, 8sps
  • 2x 10/100/1000 Mbit Ethernet
  • 2x USB 2.0
  • 1x (2x) RS-232
  • 2x RS-485
  • 2x CAN-FD up to 8Mbps
  • Optional LTE Cellular modem using miniPCIe card
  • 1x HDMI connected to module DSI port
  • 1x HDMI connected to module HDMI port (some modules do not include this functionality)
  • Micro SD card holder or on-board 32 GB eMMC
  • EEPROM 2Kbit
  • RTC
  • On-board Cortex-M7 microcontroller, 480MHz
  • (option) Built-in supercapacitor power backup for minimum 60 seconds runtime
  • 400W ESD protection for all field signals
  • Screw-locking connectors for field signals
  • Internal diagnostics of all power supplies
  • Temperature range -40 to 85 DegC
  • PCB Size 185x110 mm
  • Optional sheet metal enclosure with DIN rail mount



Coming soon

Additional COLIGO EdgeBox configurations will be available soon to address a more comprehensive range of cutomers’ performance and cost optimization needs.

COLIGO EdgeBox is dedicated to end-users, integrators and distributors of automation products that would like to easily implement AIoT in their machines, factories and processes.